Cyclone Stock Removal Wheel (3″ × 2″, 36 Grit)

The Cyclone Stock Removal Wheel (3″ × 2″, 36 Grit) is a high-performance shaping and grinding tool engineered for aggressive radius cutting and controlled material removal on natural and engineered stone surfaces. Designed for professional fabricators, this wheel delivers fast stock removal while maintaining smooth, chip-free results and minimal vibration.

Product Overview

With a 3″ diameter and approximately 2″ width, this wheel is ideal for shaping and refining edge radiuses on materials such as granite, quartz, engineered stone, and other dense surfaces. The coarse 36-grit diamond bond provides powerful cutting action for rapid material removal, making it perfect for initial shaping stages before transitioning to finer grits for finishing.

Engineered with precision balance technology, the Cyclone Stock Removal Wheel is built to operate with zero vibration, helping improve operator control and reduce fatigue during extended grinding sessions. Its design minimizes chatter and surface gouging, ensuring smoother shaping and consistent edge profiles.

Mounting & Performance

The wheel features a standard 5/8″-11 thread (M18x2) for secure mounting on most angle grinders, allowing easy integration into fabrication shop workflows. Rated for speeds up to 4,000 RPM (per Diamax catalog), it is optimized for stable, controlled operation. Wet use is recommended to reduce heat buildup, extend tool life, and enhance cutting performance.

Recommended Usage Technique

For best results, operators are advised to oscillate the wheel up and down during use. This technique promotes even diamond wear, prevents groove formation, and ensures uniform shaping across the edge profile.

Available in 36, 60, and 120 grit options, the Cyclone Stock Removal Wheel supports a complete shaping progression—from aggressive stock removal to refined preparation before polishing.

Key Features & Benefits

• 3″ diameter × ~2″ width stock removal wheel

• Coarse 36 grit for aggressive radius shaping

• Removes radius stock with chip-free performance

• Zero vibration design for smooth operation

• 5/8″-11 thread (M18x2) for angle grinder compatibility

• Recommended for wet use

• Maximum RPM: 4,000

• Available in 36, 60, and 120 grit

• Oscillation technique recommended for even wear and groove prevention

The Cyclone Stock Removal Wheel is a reliable solution for fast, controlled radius shaping and heavy material removal, delivering professional-grade performance in demanding stone fabrication environments.

The Diamax Cyclone Stock Removal Wheels Features

Product Details

Type

Cyclone Stock Removal Wheel

Size / Specs

3″ diameter × ~2″ width, coarse 36 grit, 5/8″-11 thread fits standard angle grinders.

Use

Radius and material removal on stone (e.g., granite, engineered stone) with chip-free performance and reduced vibration.

Application

Wet use recommended.

RPM

Up to 4,000 (per Diamax catalog).

Additional Features

• Removes radius stock chip-free

• Zero Vibration

• Recommended use: Oscillate wheel up and down to wear evenly and avoid grooves

• 5/8"-11 thread [M18x2]

• Available in 36, 60, and 120 grit

Available Models

ITEM # – SIZE – GRIT – FITTING – MAX RPM

SRW236

• Size: 2″ x 2″

• Grit: Coarse 36

• Fitting: 5/8″ – 11 thread

• Max RPM: 4,000

SRW260

• Size: 2″ x 2″

• Grit: Medium 60

• Fitting: 5/8″ – 11 thread

• Max RPM: 4,000

SRW2120

• Size: 2″ x 2″

• Grit: Fine 120

• Fitting: 5/8″ – 11 thread

• Max RPM: 4,000

SRW3036

• Size: 3″ x 2″

• Grit: Coarse 36

• Fitting: 5/8″ – 11 thread

• Max RPM: 4,000